Factory Direct Pipeline Products, Inc.
145 State Highway 94
Blairstown, New Jersey  07825 U.S.A.
office (908) 362-9981  fax (908) 362-5631
support@wright-austin.com

31L, 34L and 36L Gas Liquid Separators

Wright Austin high efficiency horizontal air liquid separators for horizontal or vertical down-flow applications are very compact and can be installed and supported within the pipeline without costly supports.  Wright Austin gas liquid separators employ a patented Vortex Containment Plate (VCP) and combined with centrifugal action assures maximum separation of entrainment with minimal chances of reentrainment.  Wright Austin accomplished this without complex baffles, deflectors and other structures that obstruct the flow-stream, resulting in very low pressure drops.  All Wright Austin Model 30L series air liquid separators are constructed to ASME code.  Not sure what you need? Fill-out our inquiry form for assistance.

INSTRUCTIONS: Click on the desired configuration to go to its pricing and specifications page.

Horizontal or Vertical Down-Flow
31L 36-L  34L
Model 31L Air Liquid Separator Model 36L Air Liquid Separators Model 34L Air Liquid Separators
Including Integral Sump  
31LS 36LS  
Model 31LS Air Liquid Separator Model 36LS Air Liquid Separators  
Oversized Bodies
31LR 36LR 34LR
Model 31LR Air Liquid Separator Model 36LR Air Liquid Separators Model 34LR Air Liquid Separators
Oversized Bodies and Integral Sump  
31LSR 36LSR  
Model 31LSR Air Liquid Separator Model 36LSR Air Liquid Separators  
Oversized Inlet Connection and Integral Sump  
31LSW 36LSW  
Model 31LSW Air Liquid Separator Model 36LSW Air Liquid Separators  

 

Overview

  • 30L separators are designed to remove entrained liquid and solids from air, gas or steam.  This specific design is effective for applications where the entrained liquid flow rate is up to 5% by weight of the units flow capacity.

  • When properly sized, our separators will remove up to 99% of all liquid and solids greater than 10 microns in size from an air, gas or steam flow.  The removal is accomplished by a design that causes the air/gas/steam to enter a controlled centrifugal flow.  This results in forcing the entrained material to the outer wall and the VCP prevents reentrainment.

  • 30L separators are constructed to ASME code for unfired vessels, Section VIII, Division 1.  An ASME stamp and CRN registration is available for sizes 2 inches and larger.